How To Replace A Garage Lock

Have you ever tried replacing a garage lock and felt like it would take forever? If you have, then you know how frustrating this can be. Luckily, with the help of some amazing products on the market today, garage lock replacement is not only easier; it may even save you money!

Understanding the Garage Door Lock

If your garage door is not opening, it may be because the lock has failed. Replacing a garage door lock is relatively easy and can save you a lot of hassle in the future. Follow these steps to replace a garage door lock:

1. Locate the garage door lock. It will likely be on the inside or outside of the garage door. It may be accessible through one of the side panels if it is on the outside. If it is on the inside, it may be accessible through the wall.

2. Remove the screws that hold the panel in place. On older models, there may be two screws on each side; if so, remove both screws.

3. Lift up the panel and expose the lock mechanism. The lock mechanism will likely consist of a keypad, a motor, and a security cable (if applicable).

4. Replace the old lock with a new one. For most models, all you need are replacement screws and keys (or codes). Be sure to test the new lock before re-installing it to ensure that everything works properly.

What Do I Need to Know Before Replacing My Garage Door Lock?

If you’re like most homeowners, your garage door is one of your most important security features. You probably don’t want to take the time to replace your lock if something minor can be fixed, but if your garage door is broken or not working properly, it’s time to take action. Here are some things you need to know before replacing your garage door lock:

1. Make a list of what you need. This includes the tools you’ll need (like a wrench or screwdriver), the parts you’ll need (like a new key), and any other supplies you might need (like a drill).

2. Check with your local municipality about permits and regulations. Some municipalities require that a permit be obtained before any work on your home can be done, including garage door work. If this is the case in your municipality, make sure to ask the municipal offices beforehand what documentation needs to be submitted with your application.

3. Be sure to estimate how much time the job will take accurately. It’s frustrating to spend hours fixing something only to have it take twice as long because you didn’t have an accurate estimate of how much time it would actually take to do the job correctly.

Replacing a Broken Keylock with a New One

Replacing a broken key lock is a quick and easy process and can be done by anyone with basic hand tools. Here’s how to do it:

1. Remove the old lock by unscrewing the screws that hold it in place.
2. Measure the width of the new lock and cut the appropriate length of metal cable from a hardware store or home improvement store.

3. Strip one end of the insulation cable, then attach the stripped end to one screw on the side of the old lock. Twist the screw until the cable is tight. Repeat this step for all screws on the side of the lock.

4. Push the new lock into place and screw it in place using the screws you previously removed.

5. Strip off any excess insulation from the end of the cable, then attach it to one screw on the other side of the new lock. Twist until it’s tight, then repeat this process for all screws on the other side of the lock.

Installing a New Keylock Into an Existing Garage Door Lock

If your garage door lock is outdated or broken, it’s time to replace it. A new keylock will keep intruders out of your garage and give you peace of mind. Here’s how to install one:

1. Remove the old garage door lock from the door.
2. Open the door so it is resting with the open end facing down.
3. Mark the location of the new keylock on either side of the door at approximately eye level, using a pencil or a level as needed.
4. Drill two small holes in each mark you made and insert screws into them (these will be used to secure the new key lock to the door).
5. Install the new keylock by fastening it to each door side with screws. Be sure to tighten these screws evenly so that there are no gaps between the keylock and door.

Conclusion

If you have a garage and have lost the key to your door, there are a few things that you can do to get it open. One option is to try calling your landlord or property manager, who may be able to help locate the key or provide another way into your garage. If those options are unavailable or you don’t want to bother asking for help, the next step is to call a locksmith. A locksmith can come out and replace your lock with a new one, which will keep whoever doesn’t have the key from being able to access your car or equipment inside of your garage.