Adjusting cabinet doors is essential to ensure that they function correctly and look aesthetically pleasing. If your cabinet doors are not flush with the cabinet frame or are sticking out too much, you need to adjust them in and out. This article will guide you through the process of adjusting the cabinet doors in and out.

How to adjust cabinet doors: In and out

Step 1: Locate the Screws on the Hinge

To adjust the cabinet doors in and out, you need to locate the screws on the hinge that control the distance between the door and the cabinet frame. These screws are usually located on the side of the hinge closest to the cabinet frame. Use a screwdriver to turn the screws to move the door closer to or further away from the frame.

Step 2: Adjust the Screws

Use a screwdriver to turn the screw clockwise to move the door closer to the cabinet frame. Alternatively, turn the screw counterclockwise to move the door away from the frame. Adjust the screws on both hinges until the doors are flush with the cabinet frame.

Step 3: Check for Evenness

After adjusting the screws, check to ensure that the doors are flush with the cabinet frame. If they are not, you need to adjust the screws further until the doors are flush. It is also essential to check the doors’ evenness by comparing them to the other doors on the cabinet. If one door is sticking out more than the others, adjust the screws on that door to make it flush with the others.

Step 4: Tighten the Screws

Once you have adjusted the screws to the correct position, tighten all the screws on the hinges to secure the doors in place. This ensures that the doors do not move and remain in the desired position.

FAQS 

Why are my cabinet doors sticking out too much?

If your cabinet doors are sticking out too much, it means that they are not flush with the cabinet frame. This is typically caused by the screws on the hinge that control the distance between the door and the frame being too loose. To fix this, locate the screws on the hinge and adjust them by turning them clockwise to move the door closer to the frame or counterclockwise to move it away.

Can I adjust the cabinet doors in and out without removing them from the cabinet?

Yes, you can adjust the cabinet doors in and out without removing them from the cabinet. To do this, locate the screws on the hinge that control the distance between the door and the cabinet frame. Use a screwdriver to turn the screws to move the door closer to or further away from the frame until the doors are flush.

What should I do if adjusting the screws does not fix the problem of my cabinet doors sticking out?

If adjusting the screws on the hinges does not fix the problem of your cabinet doors sticking out, there may be other underlying issues. One possible issue is that the hinges are worn out and need to be replaced. Another possible issue is that the cabinet frame is not straight or level, causing the doors to stick out. In such cases, it is best to consult a professional to assess the situation and recommend the appropriate solution.

Conclusion

In conclusion, adjusting cabinet doors in and out is a straightforward process that can be done quickly using a screwdriver. By following the steps outlined above, you can adjust your cabinet doors and make them look and function better. Remember to check for evenness and tighten the screws to ensure that the doors remain in the desired position.